Ok, so I've been recently obsessed with chalk paint. It dries nicely, covers really well, distresses well, but (supposedly) cures to be super hard and durable. I have yet to have a piece of chalk-painted furniture for an extended period of time so I can't vouch for the last part.
Here's a cute little number I bought for $15 via an online garage sale. It is heeeavyy and SOLID!
Here's what I used(minus antiquing materials):
Orbital sander (optional)
Latex paint in Valspar "Vintage"
Unsanded grout in "white"
4" foam roller
Roller tray
Paint Brush
Furniture wax
I've heard that using chalk paint means less/no sanding, but with this particular piece I just couldn't bring myself to do it unsanded!! So, I sanded it. If you're working with real wood be careful about sanding, as you might end up with some wood bleeding (ie, tannins soaking through the paint). Also, since we're using chalk paint there's no need for priming - woohoo! And if you're planning to distress it by sanding or whatever, it's best not to prime anyway.
First off, make sure the piece is clean and debris-free. For the paint I mixed about 1 cup of paint to 2 tablespoons of unsanded grout. You can find grout in the "tile" section at Lowe's (that's where it was in mine at least!), and be prepared to pick out a color. There were actually quite a few. I went with "white" - which was oddly enough very not white. It looks like this:
You should get a thick, ever-so-slightly gritty chalk paint. It will cover really well as is, but if it feels too thick just add tiny bits of water until it's the consistency you like. I used a combination of brush and roller, to get in the tight places but still get the finish smooth as much as possible. Let dry. You can either coat with a second coat or move on to distressing, or just skip all of that.
I decided to glaze this one. You'll need a faux glaze medium, and then paint to tint it with. I went with a dark brown, but you can use whatever suits your fancy. If you're not distressing or antiquing, skip to the finishing process!
Whether you decide to antique/distress or not, you'll need to finish your piece with wax or a poly. I'm going with wax so that it can maintain the antique feel and still have a little protection.










































